Full-site design previewPreview forms do not send messages
1Degree Surveillance

Audio intervention

Add a live operator voice to the response plan.

Real-time audio intervention lets a monitoring operator speak through suitable on-site audio equipment while reviewing an event. 1Degree provides this service for security and monitoring partners with client sites in the US and Canada, where the equipment and account instructions support its use.

Illustration of an Asian operator using a headset while reviewing a warehouse camera

Choose how we watch
your cameras.

Get a quote
Illustration of a fictional monitoring specialist watching several live camera feeds
Day24/7Night

Watch all day

A real person watches your live cameras, 24/7. If we see a problem, we follow your response plan.

Shared team$25per camera / month

Your cameras and other sites.

Dedicated team$35per camera / month

Only your agreed cameras.

Continuous monitoring
Illustration of an alarm at a warehouse entrance after dark
AlarmVideo check

Check alarms

When your system sends an alarm, we check the video and follow your response plan.

$10per camera / month

60 minutes of staff time per camera each month, shared across your site. Extra time: $0.30/minute.

Alarm verification
Illustration of camera checkpoints at a site gate, yard and loading bays
Scheduled camera round1 Gate 2 Yard 3 Loading bays

Check at set times

We check your cameras at the times you choose and send you a report of what we find.

$0.75per scheduled check

Up to 16 camera views and 5 minutes per check. Minimum: $22.50 per site each month.

Virtual guard tours

Know which kind of audio your client is buying

A live operator message can respond to the activity visible at that moment. A scheduled recording, automatic warning and two-way conversation are different functions. Do not describe them interchangeably in a client proposal.

Talkdown requires a usable path from the operator to the relevant speaker. Listening or conversation requires additional support. A camera's built-in microphone does not, by itself, establish that an operator can speak to the site.

Audio planning

See the activity. Reach the intended area.

  1. See

    Review the activity

  2. Speak

    Use the agreed message

  3. Check again

    Record what happens next

Conceptual areas. Test actual visibility and audibility at the site.

View the working details

The camera must show useful context. Test whether the message is intelligible in the intended speaker area.

Permission
Which events and locations allow a message?
Message
What wording or instruction may the operator use?
Reassessment
What is visible afterward, and what happens next?

Test the message where it needs to be heard

The technical test should establish more than whether a speaker makes a sound. Use an authorized person at the intended location to check intelligibility under representative conditions. Record any areas where the message is unclear.

Audio readiness review
CheckEvidence to collect
Correct destinationThe selected control operates the intended speaker or zone.
Usable soundA test listener at the target area can understand the message with typical background noise.
View and contextThe operator can associate the audio zone with the relevant camera and site instruction.
Permitted functionThe requested one-way or two-way workflow works through the actual equipment and access arrangement.
Failure handlingThe plan identifies the next action if audio fails, is not heard or receives no clear response.

Define what each audio message should accomplish

A useful audio instruction identifies the condition that permits intervention and what the message should accomplish. It might direct an unauthorized visitor away from a restricted area or ask a person to use a designated contact route. The permitted action depends on the account.

Keep messages tied to visible facts. A warning should not claim police are on their way when attendance has not been established. Authorized employees, delivery drivers and people outside the intended zone also need to be considered when designing the instruction.

For each site, review who can authorize audio, where it may be used, relevant time restrictions and any privacy or consent requirements with the responsible parties. Those requirements cannot be inferred from the presence of a speaker.

Design escalation rules for voice-down and other controls

A voice-down policy needs an observable trigger, the person authorized to approve the instruction, permitted message content and a next step. Add stop conditions: a known authorized person, loss of the relevant view, an equipment fault or circumstances outside the instruction.

If your site also has a siren or another automated deterrent, review it as a separate control. Identify who can activate it, any required authorization, its intended zone, duration and how it is stopped. Siren control is not established by 1Degree's live audio service and would require a separate capability review. Avoid a rule that assumes every unacknowledged voice message should automatically trigger another device.

Review what happens after the message

In an illustrative yard event, a person remains near a restricted gate after an initial message. The next decision depends on the response plan and what is visible: continued observation, another authorized action or a handoff to the nominated contact.

Record the message time, target zone and subsequent observable activity. Someone leaving the camera view does not prove they left the property. If the view is lost or behavior remains unclear, preserve that uncertainty in the event record.

Connect audio with the wider monitoring service

Audio is one action within a response. It cannot repair an obstructed camera, verify a person's authority by itself or provide physical attendance. The account still needs current site information and a contact route for events that require another team.

Share the camera and speaker details, the areas you want covered and the circumstances in which a message would be used. Review the audio test alongside the site-readiness worksheet before including the function in your client commitment.

Illustration of an operator checking the camera view after a response

Common questions

Before you bring an account on board.

Can any camera provide live talkdown?

No. The camera, recorder or connected audio device must support the required function through the monitoring connection. Viewing compatibility and audio compatibility need separate checks.

Is this a prerecorded warning service?

This page describes live operator-led intervention. Any automatic or prerecorded function would need its own technical and service review; it should not be assumed from the audio-intervention label.

What if the person does not respond?

The operator follows the next step in the account plan based on the available view. Lack of a visible response can have several causes, including an unheard message, so it is not proof of intent.

Can audio replace a physical response?

It can support defined remote actions. Tasks requiring attendance, access assistance or hands-on intervention remain with the designated on-site or response team.

How should we design an escalation policy for voice-down and sirens?

Define the trigger, authorized control, permitted message or action, stop conditions and fallback for each stage. Test the relevant equipment and contact route. Treat siren activation separately from live operator audio; its inclusion cannot be assumed from this service.

What would you like
to hand over?

Share your company, client-site mix and coverage needs. Let’s work through the next step.

Illustration of a fictional monitoring specialist reviewing camera views
Your camera setupYour coverage hoursYour response plan